Many homeowners place a high importance on home security, and one of the greatest ways to safeguard your property is by installing a home security camera system.
A lot of people favor Blink Outdoor Cameras because of its low cost, simplicity of installation, and capacity for remote monitoring.
I already wrote about Blink Camera setup for Apple HomeKit. You can read here.
This post will lead you through the setup of a Blink Outdoor Camera and offer advice on how to improve the performance of your camera.
Bullet Points: Blink Outdoor Camera Setup
- Lithium batteries, a Sync Module, and mounting hardware are all included with the Blink Outdoor Camera system.
- The location where your cameras will be installed needs to have a strong Wi-Fi signal.
- When choosing where to attach your Blink Outdoor Cameras, take into account the camera’s field of vision and positioning.
- Both iOS and Android smartphones support downloading the Blink App.
- You can create a Blink account directly from the app or through the Blink website.
- Syncing your cameras with the app is easy and can be done through the app’s settings.
- Basic camera settings include enabling motion detection, setting up video recording, and adjusting camera sensitivity.
- Advanced camera settings include customizing motion zones and configuring smart notifications.
- Optimizing your Blink Outdoor Camera system can help extend battery life and improve camera performance.
- Troubleshooting tips for common issues include checking Wi-Fi connectivity and adjusting camera placement.
Preparing for Installation:
1.1 What’s in the Box?
Before you begin setting up your Blink Outdoor Camera system, it’s important to make sure you have all the necessary components.
In the box, you should find:
- Blink Sync Module
- Mounting hardware
- Lithium batteries
- Quick start guide
Make sure you have all these components before proceeding with the installation. If you haven’t bought it yet, you can get it here.
1.2 Checking Your Wi-Fi Signal Strength
A strong Wi-Fi signal is essential for the proper functioning of your Blink Outdoor Camera system.
To check your Wi-Fi signal strength, you can use a Wi-Fi analyzer app or software.
This will help you determine the best location for your Blink Sync Module and cameras.
Ideally, you should have a Wi-Fi signal strength of at least -70 dBm at the location where you plan to install your cameras.
If the signal strength is weaker than this, you may need to install a Wi-Fi extender or move your cameras closer to your router.
1.3 Determining Camera Placement
The ideal location for each Blink Outdoor Camera should be chosen before mounting.
When choosing where to attach your Blink Outdoor Cameras, take into account the camera’s field of vision and positioning.
Also, think about the following things:
- The height of the camera: Ideally, your cameras should be mounted at a height of 6–8 feet.
- The angle of the camera: Position your camera at a downward angle for the best view.
- Obstructions: Avoid mounting your camera behind or near any obstructions, such as trees or bushes.
- Lighting: Make sure the area where you plan to install your cameras has adequate lighting. If it doesn’t, you may need to install additional lighting to ensure that your cameras capture clear footage.
Mounting Your Cameras:
2.1 Choosing a Mounting Location
Once you’ve determined the best placement for each camera, it’s time to choose a mounting location.
Your Blink Outdoor Camera comes with a mounting bracket and screws for easy installation.
Choose a location that is secure and will not be easily tampered with.
Avoid placing your camera within reach of potential intruders, and make sure the mounting location is level.
2.2 Mounting Your Blink Outdoor Camera
The mounting bracket must first be fastened to the camera using the supplied screws before you can mount your Blink Outdoor Camera.
Place the camera in the desired position on the mounting surface, and then use the screws to secure it.
Verify that the camera is pointing in the appropriate direction and is level.
By releasing the mounting bracket screw and adjusting the camera as necessary, you can change the camera’s angle.
2.3 Installing the Lithium Batteries
Installing the lithium batteries is necessary before you can use your Blink Outdoor Camera.
To do this, take off the camera’s battery cover and put the batteries inside.
Ensure that the positive and negative battery ends are facing in the appropriate directions when you insert the batteries.
Replace the battery cover and fasten it in place when the batteries have been put in.
You can now use your Blink Outdoor Camera.
Connecting Your Cameras to the Blink App:
3.1 Downloading the Blink App
To connect your cameras to the Blink app, you’ll need to download the app from the App Store or Google Play Store.
The app is available for both iOS and Android devices.
Once you’ve downloaded the app, open it and create a Blink account.
If you already have an account, simply log in.
3.2 Creating a Blink Account
To create a Blink account, you’ll need to provide your email address and create a password.
You’ll also need to verify your email address by clicking on a verification link sent to your email.
3.3 Syncing Your Cameras with the App
To sync your cameras with the app, you’ll need to connect your Blink Sync Module to your Wi-Fi network.
Follow the instructions provided in the app to do this.
- Once your Blink Sync Module is connected to your Wi-Fi network, you can add your cameras to the app.
- To do this, press the sync button on the back of each camera.
- The camera should blink blue, indicating that it is in pairing mode.
- Then, follow the instructions in the app to add the camera to your system.
Configuring Your Camera Settings:
4.1 Basic Camera Settings
You can set up your camera settings after connecting your cameras to the app.
Setting the camera name, modifying the camera status, and activating push notifications are all examples of basic camera settings.
4.2 Advanced Camera Settings
Configuring video quality, setting up motion detection, and turning on night vision are examples of advanced camera settings.
The sensitivity of the motion detecting sensors in your cameras is also a variable.
4.3 Enabling Motion Detection
Go to the camera settings in the app and turn on the motion detection setting to activate motion detection.
The sensitivity of the motion detecting sensors is also a variable.
4.4 Setting Up Video Recording
Go to the camera options in the app to enable video recording, then flip the setting on.
Also, you have the option to record various-length video segments.
Optimizing Your Blink Outdoor Camera System:
5.1 Maximizing Battery Life
Make sure your Blink Outdoor Cameras are installed in a location with a strong Wi-Fi signal to get the most out of their battery life.
The sensitivity of the motion detecting sensors can also be changed to cut down on pointless recordings and preserve battery life.
To further extend battery life, you can lower the video quality’s resolution.
5.2 Adjusting Camera Sensitivity
You might wish to change the sensitivity settings if your camera is sensing too much motion.
To lessen false alarms and save battery life, you can change the sensitivity in the camera settings in the app.
5.3 Adding Additional Cameras
If you want to expand your Blink Outdoor Camera system, you can easily add additional cameras to your existing system.
Simply follow the same process for mounting and syncing your new cameras with the app.
5.4 Troubleshooting Common Issues
If you’re experiencing issues with your Blink Outdoor Camera system, such as poor Wi-Fi signal, low battery life, or connectivity issues, you can find helpful troubleshooting tips on the Blink website or in the app’s help center.
FAQs: Blink Outdoor Camera Setup
Q: Can Blink Outdoor Cameras be used indoors?
A: Yes, Blink Outdoor Cameras can be used both indoors and outdoors.
Q: How long do the lithium batteries last?
A: The lithium batteries included with your Blink Outdoor Camera system can last up to two years with normal use.
Q: Can I access my Blink Outdoor Cameras remotely?
A: Yes, you can view your Blink Outdoor Cameras from anywhere using the Blink App.
Q: How many Blink Outdoor Cameras can I have?
A: You can have up to 10 Blink Outdoor Cameras connected to a single Blink Sync Module.
Conclusion: Blink Outdoor Camera Setup
Setting up a Blink Outdoor Camera system is an easy and affordable way to enhance the security of your home.
By following the steps outlined in this article, you can ensure that your cameras are properly installed, configured, and optimized for optimal performance.
Remember to regularly check your cameras’ battery life and adjust camera settings as needed to keep your home secure.
With Blink Outdoor Cameras, you can have peace of mind knowing that your property is being monitored 24/7.
You may like to read this: The Blink Camera with Apple HomeKit: How to Set It Up?
3 thoughts on “Blink Outdoor Camera Setup: A Comprehensive Guide to Securing Your Home”